MIZUNO

Post new topic Reply to topic

Swing DNA and JPX900 Forged shaft and lie angles

Mon Feb 06, 2017 10:38 am

Posted by teropa


Hi,

Last summer I was fir for Ping iE1 irons, that I play std length and yellow dot (+1.5deg upright).
I demoed a JPX900 Forged head last night, and it felt amazing. My questions concern shaft recommendations and lie angles.

I got amazing results in Trackman with KBS C-Taper Lite 110 Stiff on JPX900F. It just felt amazingly good and produced amazing results.

Below are my Swing DNA numbers that I got last summer with Mizuno fitting equipment, even though I was fit for Ping at that time. Could someone check if that is consistent with the KBS CTL 110S shaft that I found amazing? I don't think my swing has changed much from that time.

Also, I'd like advise on how to order the JPX900F as for lie angles. I have listed my club lengths and lies (actual from my Ping set) below. Based on that, I'd figure I need 1.5-2 deg Upright on JPX900F, taking into account the small length difference to Ping as well (JPX is 0.25" shorter and I am fine with that). I am hitting the Pings approximately in the center, some slight markings show on toe side, maybe at the 1deg up point, attached is a recent lie tape test that I did with the pings, with the lie angles listed below.

Swing DNA: 4386
Clubhead speed: 81mph (trackman, Mizuno JPX900F 6i)

Ping iE1 yellow dot, std length (my set)
3i 60.38deg 39"
4i 61.13deg 38.5"
5i 61.88deg 38"
6i 62.63deg 37.5"
7i 63.38deg 37"
8i 64.13deg 36.5"
9i 64.88deg 36"
PW     65.5deg  35.5"  

Mizuno JPX900F standard measurements

4i 60.0deg 38.25"
5i 60.5deg 37.75"
6i 61.0deg 37.25"
7i 61.5deg 36.75"
8i 62.0deg 36.25"
9i 62.5deg 35.75"
PW     63.0deg 35.5"

Many thanks!

Tero
Attachments
  • Ping_lie2.jpg
    Ping_lie2.jpg [ 171.99 KiB | Viewed 549 times ]
Author Information
 

Joined: Wed Mar 05, 2014 8:41 pm
Posts: 7
HCP: 12
Local club/country: Finland

Profile

Re: Swing DNA and JPX900 Forged shaft and lie angles

Mon Feb 06, 2017 10:33 pm

Posted by martynewts


Those numbers have the shaft you are in using in the top 3


regards martynewts 
Author Information
 

Joined: Fri Dec 10, 2010 7:00 pm
Posts: 262
HCP: 18
Local club/country: mill green
Irons: jpx 850 forged 5 to pw kbs reg 1 degree upright
Driver: Jpx ez driver 10.5 stock reg jpx ez 3 wood stock shaft reg jpx 800 5 wood stock reg shaft

Profile

Re: Swing DNA and JPX900 Forged shaft and lie angles

Mon Feb 06, 2017 11:28 pm

Posted by teropa


Hi Marty

You mean KBS C-Taper Lite 110 S flex is in top3 shafts with the DNA numbers and 81mph CHS?
What are the other two, if I may still ask?

Tero
Author Information
 

Joined: Wed Mar 05, 2014 8:41 pm
Posts: 7
HCP: 12
Local club/country: Finland

Profile

Re: Swing DNA and JPX900 Forged shaft and lie angles

Tue Feb 07, 2017 7:36 am

Posted by hursty


Just done run your numbers through the new version of the software:

Attachment:
Tero Results.PNG
Tero Results.PNG [ 101.49 KiB | Viewed 522 times ]
Mizuno JPX 900 - Speeder 757 Stiff
Mizuno JPX 850 16° - Aldila NVS X
Mizuno MP-001 7W - GD Pershing Stiff
Mizuno MP-5 4i-PW - PX 6.0
Mizuno MPT-5 50/54/58 - C Taper Lite X
Odyssey Versa Works #9
Author Information
User avatar
 

Joined: Sun May 15, 2011 8:49 am
Posts: 2634
Location: Telford, Shropshire
HCP: 8.4
Local club/country: No Fixed Abode
Irons: MP-5 4-PW, MPT-5 50, 54 & 58 wedges
Driver: JPX 900 Driver - 757 Stiff, JPX 850 16 Hy, MP-001 7W, Odyssey #9

Profile

Re: Swing DNA and JPX900 Forged shaft and lie angles

Tue Feb 07, 2017 11:32 am

Posted by martynewts


They made a big difference from the old version, which wasn't that old

Martynewts
Author Information
 

Joined: Fri Dec 10, 2010 7:00 pm
Posts: 262
HCP: 18
Local club/country: mill green
Irons: jpx 850 forged 5 to pw kbs reg 1 degree upright
Driver: Jpx ez driver 10.5 stock reg jpx ez 3 wood stock shaft reg jpx 800 5 wood stock reg shaft

Profile

Re: Swing DNA and JPX900 Forged shaft and lie angles

Tue Feb 07, 2017 12:13 pm

Posted by hursty


martynewts wrote:

They made a big difference from the old version, which wasn't that old

Martynewts


True Marty, I was a bit surprised by the 2 Reg recommendations. Just goes to show that you need to be actually hitting the shaft to see how it feels before buying.

Hows things with you?
Mizuno JPX 900 - Speeder 757 Stiff
Mizuno JPX 850 16° - Aldila NVS X
Mizuno MP-001 7W - GD Pershing Stiff
Mizuno MP-5 4i-PW - PX 6.0
Mizuno MPT-5 50/54/58 - C Taper Lite X
Odyssey Versa Works #9
Author Information
User avatar
 

Joined: Sun May 15, 2011 8:49 am
Posts: 2634
Location: Telford, Shropshire
HCP: 8.4
Local club/country: No Fixed Abode
Irons: MP-5 4-PW, MPT-5 50, 54 & 58 wedges
Driver: JPX 900 Driver - 757 Stiff, JPX 850 16 Hy, MP-001 7W, Odyssey #9

Profile

Re: Swing DNA and JPX900 Forged shaft and lie angles

Tue Feb 07, 2017 1:31 pm

Posted by teropa


Interesting that CTL is recommended as Regular flex. I haven't hit that. Stiff felt fantastic.

On another note, in a PDF that has shaft recommendations based on tempo and 5i swing speed, on that chart I fit perfectly into the CTL Stiff.

I wonder if I should still test the Regular as well...

Tero
Author Information
 

Joined: Wed Mar 05, 2014 8:41 pm
Posts: 7
HCP: 12
Local club/country: Finland

Profile

Re: Swing DNA and JPX900 Forged shaft and lie angles

Tue Feb 07, 2017 3:40 pm

Posted by hursty


teropa wrote:

Interesting that CTL is recommended as Regular flex. I haven't hit that. Stiff felt fantastic.

On another note, in a PDF that has shaft recommendations based on tempo and 5i swing speed, on that chart I fit perfectly into the CTL Stiff.

I wonder if I should still test the Regular as well...

Tero


Its worth testing all the shaft options and comparing not only the numbers but how it feels before you make a decision.


The shafts are only recommendations to get a starting point.
Mizuno JPX 900 - Speeder 757 Stiff
Mizuno JPX 850 16° - Aldila NVS X
Mizuno MP-001 7W - GD Pershing Stiff
Mizuno MP-5 4i-PW - PX 6.0
Mizuno MPT-5 50/54/58 - C Taper Lite X
Odyssey Versa Works #9
Author Information
User avatar
 

Joined: Sun May 15, 2011 8:49 am
Posts: 2634
Location: Telford, Shropshire
HCP: 8.4
Local club/country: No Fixed Abode
Irons: MP-5 4-PW, MPT-5 50, 54 & 58 wedges
Driver: JPX 900 Driver - 757 Stiff, JPX 850 16 Hy, MP-001 7W, Odyssey #9

Profile

Re: Swing DNA and JPX900 Forged shaft and lie angles

Tue Feb 07, 2017 3:49 pm

Posted by Stewart 57


 Why did`nt the fitter check your lie as well,  Ping and mizuno clubs have different lie angles, .
  as for length, Mizuno clubs are measured with the grips Off,..

 Stewart 57.
Author Information
User avatar
 

Joined: Tue Sep 13, 2011 2:35 pm
Posts: 1143
Location: Sandnes, Norway
HCP: 11.4
Local club/country: Sandnes Golf Club, Norway
Irons: Mizuno MP 64 3 - PW.. MP T 11. 50,54+58 wedges, Bettinardi putter
Driver: MP650, 9.5 driver, 3+, 3 (15) , 5 woods, 22' hybrid

Profile

Re: Swing DNA and JPX900 Forged shaft and lie angles

Tue Feb 07, 2017 5:51 pm

Posted by martynewts


I'm good hursty, even if the golf isnt! 
Have only strung 2 decent rounds together in the last year 

martynewts 
Author Information
 

Joined: Fri Dec 10, 2010 7:00 pm
Posts: 262
HCP: 18
Local club/country: mill green
Irons: jpx 850 forged 5 to pw kbs reg 1 degree upright
Driver: Jpx ez driver 10.5 stock reg jpx ez 3 wood stock shaft reg jpx 800 5 wood stock reg shaft

Profile

Post new topic Reply to topic
Go to page 1, 2  Next

Jump to

Copyright Mizuno 2010

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.

{}